How to Reset SOLE Treadmills | F85 Calibration Guide

Key Takeaways

• Calibration of your SOLE F85 treadmill ensures optimal performance and longevity.
• Always remove the safety key before starting the calibration process.
• Regular calibration prevents unexpected speed changes and incline issues.
• Maintaining your treadmill through regular cleaning and lubrication is essential.

At SOLE Fitness, we're proud to offer the best treadmills for your home or gym. These machines are crafted to meet the highest standards of quality and performance, ensuring they are ideal for anyone - from fitness novices to seasoned athletes. Featured Product SOLE F85: The F85 stands out with its extra-wide deck and upgraded 4.0HP motor, ensuring intense workouts for fitness enthusiasts and advanced users.

Why is Reset & Calibration Crucial for SOLE F85 Treadmill

Without regular calibration, you might encounter issues such as inaccurate speed readings, unexpected speed changes, or problems with the incline function—which can disrupt your workout and even potentially cause harm.

Calibration also helps in maintaining the longevity of your treadmill. When all parts are working correctly, there's less wear and tear, meaning your machine will last longer and require fewer repairs.

Preparation Steps

• Make sure your treadmill is on a flat, stable surface.
• Ensure the treadmill is plugged in and turned on.
• Have the user manual handy for reference.

Step-by-Step Calibration Process

Removing the Safety Key
The first step is to remove the safety key so that you can access the factory settings. Here's how you do it:

• Locate the safety key on the console of your treadmill.
• Gently pull the key out to disconnect it.

Accessing Factory Settings
With the safety key removed, you can now access the factory settings. This is where you'll start the actual calibration process. Follow these steps:

• Press and hold the "Start" and "Speed Up" buttons simultaneously.
• While holding these buttons, insert the safety key back into place.
• Continue holding the buttons until the display shows "Factory Settings."
• Press enter.

Choosing Settings
In the factory settings menu, you'll find several options that you can adjust such as metric or English settings.

But the most important settings for calibration are the wheel size diameter, speed, and elevation.

• Adjust the wheel size diameter to 2.75 and then press enter. This is how you can then get accurate speed and distance measurements during your workout sessions.
• Adjust the minimum speed to 0.5 (if needed) and then press enter.
• Adjust the maximum speed to 12.0 (if needed) and then press enter.
• Adjust the maximum elevation to 15 (if needed) and then press enter.

Completing the Calibration
After adjusting the wheel size diameter, speed, and elevation, you're almost done. The final step is to press “Start” to begin calibration. This process happens automatically—so, don’t stand on the treadmill.

Finally, test the treadmill by starting a workout to ensure everything is functioning correctly.

Troubleshooting Common Issues

Calibration Won’t Start
If the calibration process doesn’t start, make sure the safety key is properly inserted and the treadmill is plugged in. Double-check that you're holding the "Start" and "Speed Up" buttons while reinserting the safety key.

If the problem persists, consult the user manual or contact customer support for further assistance.

Error Messages
Here are some SOLE treadmill error messages and their solutions:

Error Message	Indication	Solution
E1	Low voltage	Check the outlet and extension cord.
E7	Problem with speed sensor	Check the speed sensor - make sure it’s clean and properly positioned.

Unexpected Speed Changes
If your treadmill experiences unexpected speed changes, recalibrate the speed settings and make sure the wheel size diameter is set correctly.

Incline Not Adjusting
If the incline isn’t adjusting, check the incline motor connections and recalibrate the elevation settings. Ensure there are no obstructions under the treadmill that might be preventing the incline from moving.

Final Thoughts on Resetting & Calibrating SOLE F85

Aim to calibrate your treadmill every 3-6 months, depending on usage. This helps maintain the accuracy of speed and incline settings.

Cleaning and Lubricating
Keeping your treadmill clean and well-lubricated is crucial for its longevity. Follow these steps:

• Wipe down the treadmill after each use to remove sweat and dust.
• Lubricate the belt every three months using a silicone-based lubricant.
• Clean the motor area and check for dust buildup monthly.

Regular cleaning prevents dust and debris from accumulating, which can cause wear and tear on the treadmill's components. Lubrication ensures the belt runs smoothly, reducing friction and extending the life of the motor and belt.

Checking for Wear and Tear
Regularly inspect your treadmill for signs of wear and tear. Look for:

• Fraying or loose belts.
• Unusual noises during operation.
• Loose screws or bolts.

Frequently Asked Questions (FAQ)

What if my treadmill doesn’t start the calibration process?
If your treadmill doesn't start the calibration process, ensure the safety key is properly inserted and the treadmill is plugged in. Double-check that you're holding the "Start" and "Speed Up" buttons while reinserting the safety key. If the problem persists, consult the user manual or contact customer support for further assistance.

How often should I calibrate my SOLE treadmill?
You should calibrate your SOLE treadmill every 3-6 months, depending on how frequently you use it. Regular calibration ensures that the treadmill's speed and incline settings remain accurate, providing a safe and effective workout.

Can I use my SOLE treadmill without calibration?
While you can use your SOLE treadmill without calibration, it's not recommended. Calibration ensures that the treadmill operates correctly and safely. Without it, you may experience inaccurate speed readings, unexpected speed changes, or incline issues, which can disrupt your workout and potentially cause harm.

What do I do if I get an error message during calibration?
If you encounter an error message during calibration, refer to the user manual for specific troubleshooting steps.

How do I clean and lubricate the treadmill?
To clean and lubricate your treadmill, follow these steps:

• Wipe down the treadmill after each use with a damp cloth to remove sweat and dust.
• Lubricate the belt every three months using a silicone-based lubricant. Apply the lubricant between the belt and the deck, following the manufacturer's instructions.
• Clean the motor area monthly to remove dust and debris. Use a vacuum or a soft brush to clean around the motor and other components.